www.edsuk.com




DDA Wide Access Turnstile Gates

DDA Wide Access Turnstile & Flap Gates

Available in either a single or double unit facing each other to allow for gaps of up to 2 metres allowing for sufficient space for wheelchairs, trolleys and bulky goods.

The glass panels are motorised and can open in either direction. The units can be activated either by an access control system or a push button at the reception desk or guard station, or via an automatic access entry system.

Turnstile Datasheets are located at the bottom of the page.

 

  • Disabled Access Gates
  • Wheel Chair Access Gates
  • Special Needs Turnstile
  • Pushchair Access Gates

DDA Wide Access Turnstile & Flap Gates

The DDA Wide Turnstile Access Gate make are ideal for use in a un-supervised lane and can be used in conjunction with other turnstiles or access control systems from the range.

The Special Needs Turnstile Disabled Access Gates are also available with the added benefit of IR beams to detect how many people pass through when the units are opened. In the event that the unit sees more people passing than authorised then it will alarm. This version of the Special Needs Turnstile Disabled Access Gate, the Intelligate, is ideal for when a guard cannot supervise the lane all the time.  

Glass Gates Frameless DDA Compliant EDSUKT9104

EDSUKT9104 Glass Wing Gate T9104 is a bidirectional motorised swing turnstile. It is composed of a stainless steel structure with a granite top cover.

Wing features an emergency panic release system. It is also suitable for wider passageways as it is available in a double configuration with synchronised automation. Wing allows easy access for wheelchairs where other turnstiles might cause problems.

Click Here for detail on the The EDSUKT9104 Frameless Glass DDA Gate



Glass Gates Framed DDA Compliant EDSUKT9101

The EDSUKT9101 Framed Glass Gates DDA Compliant is a simple versatile design of the DDA Gate presents a secure and stylish solution that compliments many locations, particularly those which experience high levels of pedestrian traffic, packed with many features that makes access control more integrated and less obtrusive. It has the flexibility to be integrated with a variety of control systems from a simple manually operated push button to more sophisticated fully automatic ultrasonic, overhead sensors or autosensors devices.

Another great feature of the DDA Gate is that it will automatically reset from the breakout position within 2 seconds ( the breakout force required can be varied between 60-180 newton metres to suit environments) and has in-built intelligent software that activates a 'sleep mode' if it cannot perform a function after 3 failed attempts.

This DDA Gate has the option of a full depth arm with Perspex infill panel which is more suited to leisure/ corporate environments as it has the added benefit of being fully DDA compliant as it offers full access to disabled users. The emergency breakout facility can be set up to activate an alarm and/ or flashing top light to notify staff.

Click Here for detail on the The EDSUKT9101 Frameless Glass DDA Gate


Glass Gates Frameless DDA Compliant EDSUKT9112

The EDSUKT9112 Frameless Glass DDA Gate is an automatic gate utilising microprocessor control technology in order to achieve consistently accurate operation. The gate can be easily configured to suit specific customer requirements. Options include; configuration, gate arm type and length, sensor types, alarm modes, and operational parameters (i.e. left / right hand and linked pair operation). Whichever configuration is chosen the electrical operating system remains the same.

The parameters are usually factory pre-set to specific customer requirements and should not require further attention. However, should changes be required then any competent person should be able to carry out the necessary operations. During operation the control box is constantly monitoring the position of the gate arm using "through beam" sensors mounted under the top cover, activated by a pin, which rotates with the swing of the gate arm.

If during normal operating conditions, the gate arm is registered by the microprocessor, as being within plus or minus 5 degrees of either of the operating parameters (i.e. 0 or 90 degrees) for more than a second then the input signal to the microprocessor will be deemed indeterminate. This indeterminate state will activate any pre-set alarm options i.e. sounder.

Click Here for a link to the gate video of the The EDSUKT9112 Frameless Glass DDA Gate

Click Here for detail on the The EDSUKT9112 Frameless Glass DDA Gate


Glass Gates Frameless DDA Compliant EDSUKT9113

Glass Gates DDA Wide Flap Gates

EDSUKTDDAT9113 Twin DDA Gates Fully Automatic Passage Turnstile, Functions:

  • Self Monitoring.
  • Bi-Directional controlled.
  • The Gates are locked until a valid open signal is received.
  • Reset automatically: go signal will be cancelled if passage through is not completed within pre-set time, the standard default is 5 seconds.
  • Gates can be adjusted permanent open or close when power off to meet different needs.
  • Gates can be controlled and administered by remote control.
  • Framework: 304 Grade Stainless Steel
  • Specification: 168*1200(mm)
  • Weight: 70(kg)
  • Swing length: 500(mm); max to 800
  • Interface: standard port-RS485
  • Power voltage: AC220±20 V, 50Hz
  • Drive voltage: 24V
  • Transit speed: 20-30persons per minute
  • Working Environment: Indoor/Outdoor (Outdoor - to be covered).
  • Temperature: 10 below degree to 50 degree
  • Humidity: =90%
  • Glass Swing Material is optional.
Click Here for detail on the The EDSUKT9113 Frameless Glass DDA Gate


DDA Compliant Gate EDSUKT9115



DDA Wide Flap Gates

The EDSUKT9115 Automatic Gate, Functions:

  • Adjustable opening time delay of 0 -20 seconds with the option of permanent open mode via manual switch
  • Manual key switch operation enable customer deactivation if required
  • Eco friendly and energy efficient with low power consumption
  • 90 and 180 degree operation left and right hand orientation
  • Choice of approach sensors and gate opening activations
  • Break out alarm facility, with automatic re-setting
  • Motor protection sleep mode
Click Here for detail on the The EDSUKT9115 Wide DDA Gate


EDSUKT9117 DDA Compliant Wide Automatic Pass Gate

The EDSUKT9117 is an automatic gate utilising microprocessor control technology in order to achieve consistently accurate operation. The gate can be easily configured to suit specific customer requirements. Options include; configuration, gate arm type and length, sensor types, alarm modes, and operational parameters (i.e. left / right hand and linked pair operation). Whichever configuration is chosen the electrical operating system remains the same.

The parameters are factory preset to specific customer requirements, additional changes can be made to the gate on site. During operation the controls are constantly monitoring the position of the gate arm using “through beam” sensors, activated by a pin, which rotates with the swing of the gate arm. If during normal operating conditions, the gate arm is registered by the microprocessor, as being within plus or minus 5 degrees of either of the operating parameters (i.e. 0 or 90 degrees) for more than a second then the input signal to the microprocessor will be deemed indeterminate. This indeterminate state will activate any pre-set alarm options i.e. sounder.

Click Here for detail on the The EDSUKT9117 DDA compliant Wide Automatic Pass Gate


EDSUKT9118 DDA Wide Glass Pass Gate

The EDSUKT9118 is an automatic gate utilising microprocessor control technology in order to achieve consistently accurate operation. The gate can be easily configured to suit specific customer requirements. Options include; configuration, gate arm type and length, sensor types, alarm modes, and operational parameters (i.e. left / right hand and linked pair operation). Whichever configuration is chosen the electrical operating system remains the same.

The parameters are factory preset to specific customer requirements, additional changes can be made to the gate on site. During operation the controls are constantly monitoring the position of the gate arm using “through beam” sensors, activated by a pin, which rotates with the swing of the gate arm. If during normal operating conditions, the gate arm is registered by the microprocessor, as being within plus or minus 5 degrees of either of the operating parameters (i.e. 0 or 90 degrees) for more than a second then the input signal to the microprocessor will be deemed indeterminate. This indeterminate state will activate any pre-set alarm options i.e. sounder.

Click Here for detail on the The EDSUKT9118 DDA compliant Wide Glass Pass Gate


EDSUKT9119 Coin Operated DDA Disabled Pushchair Wheelchair Wide Swing Gates

The EDSUKT9119 is an automatic gate utilising microprocessor control technology in order to achieve consistently accurate operation. The gate can be easily configured to suit specific customer requirements. Options include; configuration, gate arm type and length, sensor types, alarm modes, and operational parameters (i.e. left / right hand and linked pair operation). Whichever configuration is chosen the electrical operating system remains the same.

The EDSUKT9119 DDA gate is suitable for a range of scenarios and can accommodate pushchairs, wheelchairs and other wide access requirements.

  • Coin Operated
  • Suitable for Pushchair Wheelchair
  • Microprocessor Controlled
  • Configurable infill panel

EDSUKT9119 DDA Coin Operated Swing Gate Datasheet
Click on datasheet/pdf icon to open datasheet or click the image to see in a gallery

Datasheets

Turnstile Hire

We are able to provide Turnstile Hire & Short Term Turnstile Rental, either full height turnstile or waist half height turnstile. Designed to control temporary access, for occasions such as Concerts, Sports Events, Meeting, Rallies, Exhibitions, anywhere you need to control access into the site.

Click Here for TURNSTILE HIRE

Existing Systems

EDS can maintain any type of existing system, providing on-site and workshop repairs to any make of systems. With a large stockholding of spare parts we can turn around repairs rapidly.

Routine Maintenance

Regular maintenance is fundamental to ensure your systems operate as effectively as when they were first installed, we are able to provide competitive quotation for maintenance of new and any type of existing system.

DDA Wide Access Turnstile & Flap Gates

Rotagate, Rotary Gate, Wheelchair Gate, P Gate

Sign up for our newsletter